Scroll Top

Replacement BoilerMate

Are you looking to replace your old BoilerMate Thermal Store?
Here is a selection of compatible replacement boilers for BoilerMate…

BoilerMate

PulsaCoil Stainless

Installed from £2,399.76

Advance

Advance ETS

Installed from £2,581.31

Sunamp

Sunamp Thermino

Installed from £4,885.27

BoilerWave

BoilerWave - The world's first microwave boiler.

Installed from £3,495.95

Replacement BoilerMate

Is Your Gledhill BoilerMate Leaking or Faulty?
Here’s What You Need to Know

If your home was built in the late 1980s or early 2000s, you might have a Gledhill BoilerMate installed. These units are commonly found in homes in Bedfordshire, Berkshire, Buckinghamshire, Cambridgeshire, Essex, Derbyshire, Greater London, Hertfordshire, Leicestershire, Northamptonshire, Nottinghamshire, Oxfordshire, Surrey, Warwickshire, West Midlands & Worcestershire.
Homeowners frequently encounter problems with the BoilerMate, such as circuit board (PCB) failures or leaks. Unfortunately, many everyday gas engineers and plumbers are unfamiliar with these complex systems, making repairs challenging.
What Should You Do?
When faced with persistent issues, especially leaks, the general advice is to replace the BoilerMate. Leaks can lead to significant corrosion, which can cause substantial damage over time.
Replacement Options

1. Combination Boiler

A common and cost-effective solution is to replace both the BoilerMate and the existing boiler with a combination boiler. However, there are a few considerations:
Performance: Unless you opt for a storage combination boiler (e.g., Worcester-Bosch Highflow), expect a noticeable reduction in hot water performance. This is particularly important for homes with two or more bathrooms, where reduced hot water availability can lead to inconvenience.
Installation: Installing a combination boiler often requires a larger gas pipe, which might necessitate running the pipe externally along the outside of your home in your brickwork or lifting carpets and flooring to access the subfloor. Additionally, combination boilers require a pressurized heating system, unlike some BoilerMate systems, which use a header tank in the loft. This change in pressure may cause leaks in existing radiators and pipework, and such issues are typically not covered under warranty.
Cost: A medium-capacity 30KW combi boiler installation generally costs around £3,000, including VAT.

2. Un-Vented Cylinder

Another option is replacing the BoilerMate with an un-vented hot water cylinder, like the Worcester-Bosch Green Storage. This allows you to keep your existing boiler, which might still have years of service left, and maintain high hot water output.
Advantages: An un-vented cylinder provides high output, mains-pressure hot water, similar to what you’re accustomed to, and uses a standard control system understood by most gas engineers.
Considerations: Installation requires a safety discharge pipe to expel excess heat or pressure outside. This may involve lifting carpets and flooring and running a copper pipe along your external walls. This option can be more expensive than a standard combi boiler, particularly if you eventually replace the existing boiler with a new condensing model. Expect to pay upwards of £3,000, including VAT.
Financing: With options like the Worcester-Bosch Green Storage, you can spread the cost over up to 10 years at 7.9% APR fixed or choose 12 months interest-free financing.

3. Thermal Store

Replacing the BoilerMate with a thermal store, such as an Advance, or a Thermflow from McDonald Water Storage, is often the best alternative.
Benefits: Thermal stores offer performance akin to the BoilerMate without the complicated circuitry. They are compatible with existing boilers, allowing you to upgrade to a condensing boiler at a later date. The system continues to use the existing header tank, maintaining system pressure and minimizing the risk of leaks. Importantly, no additional pipework is required, reducing disruption during installation.
Cost: Although slightly more expensive, replacing the BoilerMate with a thermal store typically costs around £3,500, including VAT, depending on the size. The reduced risk and disruption can provide added value.
Financing: When installed with a Worcester-Bosch boiler, we offer payment plans of up to 10 years at 7.9% APR fixed or 12 months interest-free-credit.

Need More Advice?

If you’re unsure about which option is best for your home, contact our technical support line for free, no-obligation advice.
Choosing the Right Replacement

When it comes to replacing your Pulsacoil system, it’s essential to choose the right unit for your specific needs. Consider the following factors:

  • Capacity: Ensure the new unit has the appropriate capacity to meet your household’s hot water demands. This depends on the number of occupants and the typical water usage patterns.
  • Compatibility: Verify that the new Pulsacoil system is compatible with your existing plumbing and electrical setup. PulsaCoil Group’s professional installation service will ensure a smooth replacement process.
  • Energy Efficiency: Look for models with high energy efficiency ratings to maximize savings on your energy bills.
  • Brand and Model: Research different brands and models to find a unit that has a good reputation for reliability and performance. Reading our customer reviews, and speaking with our qualified team, they will be more than happy to answer any questions that you may have.
Professional Installation and Maintenance

Proper installation is crucial for the optimal performance of your new BoilerMate system. It’s highly recommended to hire a certified and experienced professional to handle the replacement. A professional installer will ensure that the unit is installed correctly, safely, and in compliance with all relevant regulations. BoilerMate Group engineers have a collective 200 years experience, repairing, and installing BoilerMate boiler systems.

Regular maintenance is also essential to extend the lifespan of your BoilerMate system and keep it running efficiently. Schedule annual inspections and safety visits with one of BoilerMate Group’s qualified technicians to check for any potential issues and perform necessary maintenance tasks.

Replacement BoilerMate Services by BoilerMate Group

At BoilerMate Group, we specialize in providing premium BoilerMate replacement services. Our team of experienced professionals is dedicated to ensuring that your home’s hot water system is efficient, reliable, and tailored to your specific needs. Here’s what you can expect from our replacement services:

  • Expert Consultation: We assess your current system and recommend the best replacement options based on your household’s requirements.
  • Quality Products: We offer a range of high-quality BoilerMate units from reputable brands, ensuring durability and performance.
  • Professional Installation: Our certified engineers handle the entire installation process, ensuring a seamless and hassle-free experience.
  • Post-Installation Support: We provide ongoing support and maintenance services to keep your new BoilerMate system in top condition.
Contact Us

If you’re experiencing issues with your BoilerMate system or it’s time for an upgrade, contact BoilerMate Group today. Our team is ready to help you find the perfect replacement unit and ensure a smooth and efficient installation process. Enjoy reliable hot water and improved energy efficiency with a new BoilerMate system from BoilerMate Group.

Price Match Promise
PulsaCoil Installation Service

STAY CONNECTED TO LEARN MORE ABOUT
REPLACEMENT PULSACOIL BOILERS

VISIT PULSACOIL GROUP’S SOCIAL MEDIA PAGES